When installing a new toilet, is the old one taken out first? Keep in mind that many bathrooms fixtures are hefty, and you may need assistance moving them. While you're doing it, be careful not to damage the pipes or spring any leaks in the process of removing it. Let's get the scoop on the proper way to uninstall a toilet!

What You Must Know About Taking Out a Toilet

The water supply and waste outlet are the two most important pipes in your bathroom. When the flapper is flushed, water enters the tank through a supply line that is 3/8 inches in diameter, and waste is flushed away through a toilet drain that is 3 inches in diameter.

Both of those should be correctly disconnected. A toilet tank is what the fixture uses to attach to the wall or floor.

Porcelain and vitreous china, the materials used to make toilet bowls, are fragile and prone to cracking and breaking.

It's also important to keep in mind that flushing toilets can be a bit of a workout. Dropping the old, heavy toilet can cause harm to your floor or other parts of your home, even if you don't worry about destroying the old toilet.

Why Do We Need to Do Without a Bathroom?

When a toilet leaks too badly to be fixed, it is usually replaced. Put in a new, low-flow Water Sense toilet while you're at it.

Another option is to do away with the toilet altogether if it is out of style. Including a black toilet in your modern bathroom remodels is perfectly acceptable.

An other justification for ripping down a perfectly serviceable lavatory is to upgrade to a model with a higher seat height for an elderly or disabled resident.

You shouldn't throw away a toilet because of a few stains. Cleaning the toilet bowl's base can make even the darkest stains disappear, giving the illusion of a brand new fixture.

Do I Need Help to Have a Toilet Taken Out?

DIY plumbers at the intermediate or beginning level can safely and successfully remove a toilet. Hiring a plumber is unnecessary. But, if the issue is severe then hiring Mosman plumbers is the best alternative. 

You really need assistance when moving heavy toilets, though. An extra pair of hands will be a huge assistance when it's time to haul the toilet to the curbside trash can.

How to Take Out a Bathroom Bowl in 5 Simple Steps

There are only five simple steps involved in taking out the toilet.

First, disconnect the water line and turn off the water main.

Turning off the water to the toilet will prevent any flooding that could necessitate a claim to your homeowner's insurance. Fortunately, the water supply shutoff valve is conveniently located close to the commode. Find the hose connection for the water supply and attach it. Use it as a guide to locate the water shutoff valve located along the wall or beside the bathroom sink.

Two, take out the tank.

With a two-piece model, the tank can be removed independently of the bowl. Two-piece toilets are easier to remove since the load is distributed between two separate sections.

Unscrew the plastic nut or bolt holding the tank to the bowl to get the tank out. Hold on to the bucket just in case there's a leak.

Three, take off the covers from the base of the toilet

The base of the toilet is fitted with covers to prevent water leakage.

Caps can be taken off with a simple flathead screwdriver.

When corrosion and sediment buildup from hard water makes the bolts look too rusted to undo without a hacksaw, that's when it's time to pull out the power tool.

Four: Raise the commode and dump it

You should be able to lift the toilet and carry it away now. It's recommended to take the seat off before moving the toilet so it doesn't get in the way.

This is the point at which you'll most likely require assistance, especially if you're dealing with a bulky, one-piece toilet.

Lastly, clean and cover the sewer line.

When the toilet is turned off, it can prevent sewer gas from reentering the residence. If you plan on fixing this today, put a towel over the sewer pipe. Sewer line caps are permanent solutions if the replacement will take more time than expected.